How to wax the wood floor
1. Preparation of waxing environment
Floor waxing is the best choice in good weather, avoid construction in rainy days with high humidity and low temperature, humidity is too high to produce white turbidity phenomenon, and the temperature below 5 degrees Celsius floor wax is easy to harden, unfavorable construction.
2. Preparation of construction tools and floor wax
Large area waxing machine is often used, small area is used dust push or soft cloth. Now many people also have a small volume, light weight waxing machine, waxing can be convenient to use. If there is no waxing machine, you can use dust push, soft cloth and other simple tools, do not look at the tool is simple, but the waxing effect is not necessarily poor, but may be more detailed. In addition, it is necessary to prepare the corresponding floor wax.
3. Tidy up and clean the floor
Before you start waxing, you need to organize the furniture in the waxing area and determine the waxing area. Also clean the floor area and make sure there is no dust or other dirt before waxing to prevent a waxing finish. Generally use a lime dry mop or soft cloth to wipe the floor. After cleaning, wait until the moisture on the floor is completely dry before waxing.
4. Wax
Shake down the container of floor wax and stir well. Use a clean cloth or sponge to soak the vine floor wax thoroughly, so as not to drip. Shake and fully stir the floor wax evenly. Local test can be carried out in the inconspicuous place first, and then the whole wax can be applied after confirming that there is no abnormality. Then use a clean rag or special waxing dust to fully soak the wood floor wax, according to the direction of the wood grain of the wood floor carefully daub, do not be too fast, do not leak coating or uneven thickness, maintain uniform thickness.
5. Polishing
Generally, the method of playing two times is used. After the first time, the wax is played again. Each wax must wait for the first layer of wax to dry before the next layer. When completely dry, polish the surface with a fine sandpaper or soft cloth.
Post time: Dec-06-2022